From a6d3ce28a8f4bfd3084eb783be70e67f23f2fb5c Mon Sep 17 00:00:00 2001 From: Anson Biggs Date: Fri, 27 Jul 2018 14:34:25 -0700 Subject: [PATCH] Updated to include tags --- HDD Pi Case V1/README.md | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-) diff --git a/HDD Pi Case V1/README.md b/HDD Pi Case V1/README.md index 1db3790..7c0774d 100644 --- a/HDD Pi Case V1/README.md +++ b/HDD Pi Case V1/README.md @@ -1,11 +1,17 @@ -Summary -======= +# HDD Pi Case V1 + +## Tags + +` +computer, hard_drive, McMaster-Carr, Raspberry_Pi, Raspberry_pi_3, raspberry_pi_case, +` + +## Summary This Raspberry Pi case is designed to fit into a standard 3.5in hard drive slot. It works well with tool less mounting systems, but I also added the ability for threaded nuts to be dropped in which work great as well and make this compatible with anything that a standard hard drive fit into. The nuts that I built around are the [McMaster-Carr 90480a007](https://www.mcmaster.com/#90480a007/) This cost me $8.32 for 100 nuts delivered to my door but I am sure a local hardware store would have the same thing far cheaper. -Print Settings -============== +## Print Settings **Printer Brand:** @@ -31,17 +37,14 @@ Yes 15% - - **Notes:** I have printed this part a few times and you can get away with doing no supports you just end up with some long bridges. I would advise against supports inside where the nuts go because it is nearly impossible to get those supports out correctly. -How I Designed This -=================== +## How I Designed This This was my first project using Fusion 360, and my first project built from the ground up for 3D printing. I started by building a profile sketch or “master sketch” of an HDD with the placement of the screw holes. Then I decided to make a rough Raspberry Pi model since I plan on many 3D printed projects for the Pi it would be easier to have a digital copy. Version 2 will be worked on soon since now I have experience with 3D printing and I know that things like the long supports that require long bridges are a big no no. Ill also probable change the positioning of the Pi to be more in the middle. Any other feedback would be greatly appreciated. -![](https://cdn.thingiverse.com/assets/2a/11/ce/33/5a/2018-07-26_23-09-29.gif) \ No newline at end of file +![](https://cdn.thingiverse.com/assets/2a/11/ce/33/5a/2018-07-26_23-09-29.gif)