Initial version of readme

Oldie/Oldie Vice/README.md

@@ -0,0 +1,98 @@
+# Oldie Wrench
+
+## Tags
+
+ThisOldTony, 3dprintable, 3dprinted, moving_parts, tool, useful, clamp, thread, household
+
+## Summary
+
+
+
+### Some Assembly Required
+
+
+
+## Print Settings
+
+**Printer Brand:** Creality
+
+**Printer:** Ender 3
+
+**Filament:** [RepRapper Red 3D Printer Filament PLA 1.75mm](https://amzn.to/2xHdjfO)
+
+### In General
+
+This is a very easy print with the exception of the thread. Below I will go into detail into what is recommended to get the best results but this is a very easy print and every printer should be able to do the whole thing in about 10 hours. This print doesn't require any supports or rafts, but the orientation and layer height is important and thats mainly what I will discuss below. 
+
+### baseBottom.stl
+
+Build time: 1 hour 31 minutes
+Filament length: 7571.7 mm
+Plastic weight: 22.76 g (0.05 lb)
+
+Supports: No, if your really worried you could put some on the inside, but its a small bridge and the supports would be a pain to remove so I wouldn't bother.
+Layer Height: .2mm
+External Fill Pattern: I liked the look of concentric but it shouldn't matter.
+
+### baseTop.stl
+
+Build time: 0 hours 33 minutes
+Filament length: 3811.6 mm
+Plastic weight: 11.46 g (0.03 lb)
+
+Supports: I printed it on its side so the entire shaft that goes into the handle needs supports under it.
+Layer Height: .2
+
+![headHandlePreview](https://blog.ansonbiggs.com/content/images/2018/08/headHandlePreview.png)
+
+### xxxClamp.stl
+
+Build time: 1 hour 18 minutes
+Filament length: 538.1 mm
+Plastic weight: 1.62 g (0.00 lb)
+
+Supports: No
+Layer Height: .1
+External Fill Pattern: Concentric
+
+Make sure to print this with the hex side down on the print bed, this ensures that you get some really nice threads.
+
+### thread.stl
+
+Build time: 0 hours 49 minutes
+Filament length: 729.4 mm
+Plastic weight: 2.19 g (0.00 lb)
+
+Supports: No
+Layer Height: .1
+External Fill Pattern: Concentric
+
+Make sure to print this with the flat side down on the print bed, this ensures that you get some really nice threads.
+
+### threadEnd.stl
+
+Build time: 0 hours 49 minutes
+Filament length: 729.4 mm
+Plastic weight: 2.19 g (0.00 lb)
+
+Supports: No
+Layer Height: .1
+External Fill Pattern: Concentric
+
+Make sure to print this with the flat side down on the print bed, this ensures that you get some really nice threads.
+
+![threadNutPreview](https://blog.ansonbiggs.com/content/images/2018/08/threadNutPreview.png)
+
+## Download
+
+[Find this Model on my Thingiverse](https://www.thingiverse.com/thing:3055019)  
+[Check out this Project on my GitLab](https://gitlab.com/MisterBiggs/MyModels/tree/master/Oldie%20Wrench)  
+[Check out this Project on my Blog](https://blog.ansonbiggs.com/oldie-wrench/)  
+
+## Images
+
+![homeRender](https://blog.ansonbiggs.com/content/images/2018/08/homeRender.png)  
+
+![homeSection](https://blog.ansonbiggs.com/content/images/2018/08/homeSection.png)  
+
+![topRender](https://blog.ansonbiggs.com/content/images/2018/08/topRender.png)