mirror of
https://gitlab.com/MisterBiggs/MyModels.git
synced 2025-07-23 14:41:31 +00:00
Standardized things a bit, ran through grammarly, also updated on site
This commit is contained in:
@@ -1,43 +1,25 @@
|
||||
# HDD Pi Case V1
|
||||
|
||||
## Tags
|
||||
|
||||
`
|
||||
computer, hard_drive, McMaster-Carr, Raspberry_Pi, Raspberry_pi_3, raspberry_pi_case,
|
||||
`
|
||||
|
||||
## Summary
|
||||
|
||||
This Raspberry Pi case is designed to fit into a standard 3.5in hard drive slot. It works well with tool less mounting systems, but I also added the ability for threaded nuts to be dropped in which work great as well and make this compatible with anything that a standard hard drive fit into.
|
||||
This Raspberry Pi case is designed to fit into a standard 3.5in hard drive slot. It works well with tool-less mounting systems, but I also added the ability for threaded nuts to be dropped in which work great as well and make this compatible with anything that a standard hard drive fit into.
|
||||
The nuts that I built around are the [McMaster-Carr 90480a007](https://www.mcmaster.com/#90480a007/) This cost me $8.32 for 100 nuts delivered to my door but I am sure a local hardware store would have the same thing far cheaper.
|
||||
|
||||
**[I Believe these nuts from Amazon will work as well.](https://amzn.to/2LP1vSA)**
|
||||
|
||||
## Print Settings
|
||||
|
||||
**Printer Brand:**
|
||||
**Printer Brand:** Creality
|
||||
|
||||
Creality
|
||||
**Printer:** Ender 3
|
||||
|
||||
**Printer:**
|
||||
**Rafts:** No
|
||||
|
||||
Ender 3
|
||||
**Supports:** Yes
|
||||
|
||||
**Rafts:**
|
||||
**Resolution:** 0.40 mm
|
||||
|
||||
No
|
||||
**Infill:** 15%
|
||||
|
||||
**Supports:**
|
||||
|
||||
Yes
|
||||
|
||||
**Resolution:**
|
||||
|
||||
0.40 mm
|
||||
|
||||
**Infill:**
|
||||
|
||||
15%
|
||||
|
||||
**Notes:**
|
||||
### Notes
|
||||
|
||||
I have printed this part a few times and you can get away with doing no supports you just end up with some long bridges. I would advise against supports inside where the nuts go because it is nearly impossible to get those supports out correctly.
|
||||
|
||||
@@ -45,6 +27,36 @@ I have printed this part a few times and you can get away with doing no supports
|
||||
|
||||
This was my first project using Fusion 360, and my first project built from the ground up for 3D printing. I started by building a profile sketch or “master sketch” of an HDD with the placement of the screw holes. Then I decided to make a rough Raspberry Pi model since I plan on many 3D printed projects for the Pi it would be easier to have a digital copy.
|
||||
|
||||
Version 2 will be worked on soon since now I have experience with 3D printing and I know that things like the long supports that require long bridges are a big no no. Ill also probable change the positioning of the Pi to be more in the middle. Any other feedback would be greatly appreciated.
|
||||
To make this model I used my Rough Raspberry Pi Model that you can find [here](http://blog.ansonbiggs.com/rough-raspberry-pi-model/), you can also see it in the picture below.
|
||||
|
||||
|
||||
|
||||
|
||||
Version 2 will be worked on soon since now I have experience with 3D printing and I know that things like the long supports that require long bridges are a big no-no. I'll also probably change the positioning of the Pi to be more in the middle. Any other feedback would be greatly appreciated.
|
||||
|
||||
## Download
|
||||
|
||||
[Download this Model on Thingiverse](https://www.thingiverse.com/thing:3021978)
|
||||
|
||||
[Check out this Project on my Gitlab](https://gitlab.com/MisterBiggs/MyModels/tree/master/HDD%20Pi%20Case%20V1)
|
||||
|
||||
[Check out this Project on my Blog](http://blog.ansonbiggs.com/hdd-pi-case-v1/)
|
||||
|
||||
## Images
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user