Oldie Wrench
Tags
ThisOldTony, 3dprintable, 3dprinted, moving_parts, tool, useful, clamp, thread, household
Summary
Some Assembly Required
Print Settings
Printer Brand: Creality
Printer: Ender 3
Filament: RepRapper Red 3D Printer Filament PLA 1.75mm
In General
This is a very easy print with the exception of the thread. Below I will go into detail into what is recommended to get the best results but this is a very easy print and every printer should be able to do the whole thing in about 10 hours. This print doesn't require any supports or rafts, but the orientation and layer height is important and thats mainly what I will discuss below.
baseBottom.stl
Build time: 1 hour 31 minutes Filament length: 7571.7 mm Plastic weight: 22.76 g (0.05 lb)
Supports: No, if your really worried you could put some on the inside, but its a small bridge and the supports would be a pain to remove so I wouldn't bother. Layer Height: .2mm External Fill Pattern: I liked the look of concentric but it shouldn't matter.
baseTop.stl
Build time: 0 hours 33 minutes Filament length: 3811.6 mm Plastic weight: 11.46 g (0.03 lb)
Supports: I printed it on its side so the entire shaft that goes into the handle needs supports under it. Layer Height: .2
xxxClamp.stl
Build time: 1 hour 18 minutes Filament length: 538.1 mm Plastic weight: 1.62 g (0.00 lb)
Supports: No Layer Height: .1 External Fill Pattern: Concentric
Make sure to print this with the hex side down on the print bed, this ensures that you get some really nice threads.
thread.stl
Build time: 0 hours 49 minutes Filament length: 729.4 mm Plastic weight: 2.19 g (0.00 lb)
Supports: No Layer Height: .1 External Fill Pattern: Concentric
Make sure to print this with the flat side down on the print bed, this ensures that you get some really nice threads.
threadEnd.stl
Build time: 0 hours 49 minutes Filament length: 729.4 mm Plastic weight: 2.19 g (0.00 lb)
Supports: No Layer Height: .1 External Fill Pattern: Concentric
Make sure to print this with the flat side down on the print bed, this ensures that you get some really nice threads.
Download
Find this Model on my Thingiverse
Check out this Project on my GitLab
Check out this Project on my Blog
Images
