Anson/blog-static
1
0
Fork 0
mirror of https://gitlab.com/MisterBiggs/blog-static.git synced 2025-06-15 22:56:49 +00:00
Code Releases Activity
blog-static/yet-another-test-suite-stringing-test/index.html

486 lines
29 KiB
HTML
Raw Blame History

<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8">
<meta http-equiv="X-UA-Compatible" content="IE=edge">
<title>Yet Another Test Suite: Stringing Test</title>
<meta name="HandheldFriendly" content="True">
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<link rel="stylesheet" type="text/css" href="../assets/built/screen.css">
<meta name="description" content="Stringing is when filament goes in between the outside perimeter of two print locations. This guide is intended to help eliminate stringing in your prints.">
<link rel="shortcut icon" href="../favicon.png" type="image/png">
<link rel="canonical" href="http://localhost:8080/yet-another-test-suite-stringing-test/">
<meta name="referrer" content="no-referrer-when-downgrade">
<link rel="amphtml" href="http://localhost:8080/yet-another-test-suite-stringing-test/amp/">
<meta property="og:site_name" content="Anson 3D">
<meta property="og:type" content="article">
<meta property="og:title" content="Yet Another Test Suite: Stringing Test">
<meta property="og:description" content="Go to My full list of 3D Printing Troubleshooting Guides
[http://blog.ansonbiggs.com/yet-another-test-suite/]
This is the beginning of a larger suite of test prints I am developing that can
be used to calibrate your 3D printer cheaply, and quickly.
Summary
Stringing, also often referred to as Oozing, is when a print has small hairs or
in extreme cases thick lines of the filament in between the outside perimeter of
two print locations. Luckily cleanup for Stringing is generally pretty simple as
">
<meta property="og:url" content="http://localhost:8080/yet-another-test-suite-stringing-test/">
<meta property="og:image" content="../content/images/2018/08/_---Poor-Stringing.png">
<meta property="article:published_time" content="2018-08-08T09:02:27.000Z">
<meta property="article:modified_time" content="2018-08-22T07:02:37.000Z">
<meta property="article:tag" content="Yet Another Test Suite">
<meta property="article:tag" content="Inventor">
<meta property="article:tag" content="Guide">
<meta property="article:tag" content="3D Printing">
<meta property="article:publisher" content="https://www.facebook.com/Anson3D">
<meta name="twitter:card" content="summary_large_image">
<meta name="twitter:title" content="Yet Another Test Suite: Stringing Test">
<meta name="twitter:description" content="Go to My full list of 3D Printing Troubleshooting Guides
[http://blog.ansonbiggs.com/yet-another-test-suite/]
This is the beginning of a larger suite of test prints I am developing that can
be used to calibrate your 3D printer cheaply, and quickly.
Summary
Stringing, also often referred to as Oozing, is when a print has small hairs or
in extreme cases thick lines of the filament in between the outside perimeter of
two print locations. Luckily cleanup for Stringing is generally pretty simple as
">
<meta name="twitter:url" content="http://localhost:8080/yet-another-test-suite-stringing-test/">
<meta name="twitter:image" content="http://localhost:8080/content/images/2018/08/_---Poor-Stringing.png">
<meta name="twitter:label1" content="Written by">
<meta name="twitter:data1" content="Anson Biggs">
<meta name="twitter:label2" content="Filed under">
<meta name="twitter:data2" content="Yet Another Test Suite, Inventor, Guide, 3D Printing">
<meta name="twitter:site" content="@Anson_3D">
<meta name="twitter:creator" content="@Anson_3D">
<meta property="og:image:width" content="810">
<meta property="og:image:height" content="450">
<script type="application/ld+json">
{
"@context": "https://schema.org",
"@type": "Article",
"publisher": {
"@type": "Organization",
"name": "Anson 3D",
"logo": {
"@type": "ImageObject",
"url": "http://localhost:8080/favicon.png",
"width": 60,
"height": 60
}
},
"author": {
"@type": "Person",
"name": "Anson Biggs",
"image": {
"@type": "ImageObject",
"url": "http://localhost:8080/content/images/2019/09/anson_suit_cropped.jpg",
"width": 1513,
"height": 1090
},
"url": "http://localhost:8080/author/anson/",
"sameAs": [
"http://ansonbiggs.com",
"https://twitter.com/Anson_3D"
]
},
"headline": "Yet Another Test Suite: Stringing Test",
"url": "http://localhost:8080/yet-another-test-suite-stringing-test/",
"datePublished": "2018-08-08T09:02:27.000Z",
"dateModified": "2018-08-22T07:02:37.000Z",
"image": {
"@type": "ImageObject",
"url": "http://localhost:8080/content/images/2018/08/_---Poor-Stringing.png",
"width": 810,
"height": 450
},
"keywords": "Yet Another Test Suite, Inventor, Guide, 3D Printing",
"description": "Go to My full list of 3D Printing Troubleshooting Guides\n[http://blog.ansonbiggs.com/yet-another-test-suite/]\nThis is the beginning of a larger suite of test prints I am developing that can\nbe used to calibrate your 3D printer cheaply, and quickly.\n\nSummary\nStringing, also often referred to as Oozing, is when a print has small hairs or\nin extreme cases thick lines of the filament in between the outside perimeter of\ntwo print locations. Luckily cleanup for Stringing is generally pretty simple as\n",
"mainEntityOfPage": {
"@type": "WebPage",
"@id": "http://localhost:8080/"
}
}
</script>
<script src="../public/ghost-sdk.min.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script type="2a9cc72ee1b4edbf74f347c7-text/javascript">
ghost.init({
clientId: "ghost-frontend",
clientSecret: "245af786ee20"
});
</script>
<meta name="generator" content="Ghost 2.31">
<link rel="alternate" type="application/rss+xml" title="Anson 3D" href="http://localhost:8080/rss/">
<script async src="https://analytics.ansonbiggs.com/tracker.js" data-ackee-server="https://analytics.ansonbiggs.com" data-ackee-domain-id="0846bb59-c7b6-4a0b-bc05-135f82425319" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script src="https://unpkg.com/mermaid@8.0.0/dist/mermaid.min.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script type="2a9cc72ee1b4edbf74f347c7-text/javascript">mermaid.initialize({startOnLoad:true});</script>
<script src="https://cdnjs.cloudflare.com/ajax/libs/prism/1.14.0/prism.min.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script src="https://cdnjs.cloudflare.com/ajax/libs/prism/1.14.0/plugins/line-numbers/prism-line-numbers.min.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<link rel="stylesheet" type="text/css" href="https://cdnjs.cloudflare.com/ajax/libs/prism/1.14.0/themes/prism.min.css">
<link rel="stylesheet" type="text/css" href="https://cdnjs.cloudflare.com/ajax/libs/prism/1.14.0/plugins/line-numbers/prism-line-numbers.min.css">
<link rel="stylesheet" type="text/css" href="https://cdnjs.cloudflare.com/ajax/libs/prism/1.14.0/themes/prism-coy.min.css">
<script src="https://cdnjs.cloudflare.com/ajax/libs/prism/1.14.0/components/prism-powershell.min.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script src="https://cdnjs.cloudflare.com/ajax/libs/prism/1.14.0/components/prism-css.min.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script src="https://cdnjs.cloudflare.com/ajax/libs/prism/1.14.0/components/prism-c.min.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script src="https://cdnjs.cloudflare.com/ajax/libs/prism/1.14.0/components/prism-clike.min.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script src="https://cdnjs.cloudflare.com/ajax/libs/prism/1.14.0/components/prism-python.min.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script async src="https://www.googletagmanager.com/gtag/js?id=UA-99766784-3" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script type="2a9cc72ee1b4edbf74f347c7-text/javascript">
window.dataLayer = window.dataLayer || [];
function gtag(){dataLayer.push(arguments);}
gtag('js', new Date());
gtag('config', 'UA-99766784-3');
</script>
<script data-name="BMC-Widget" src="https://cdnjs.buymeacoffee.com/1.0.0/widget.prod.min.js" data-id="Anson" data-description="Support my work on Buy me a coffee!" data-message="Please consider donating if you enjoy my content!" data-color="#5F7FFF" data-position="right" data-x_margin="18" data-y_margin="18"></script>
</head>
<body class="post-template tag-yet-another-test-suite tag-inventor tag-guide tag-3d-printing">
<div class="site-wrapper">
<header class="site-header outer">
<div class="inner">
<nav class="site-nav">
<div class="site-nav-left">
<a class="site-nav-logo" href="../">Anson 3D</a>
<ul class="nav" role="menu">
<li class="nav-home" role="menuitem"><a href="../">Home</a></li>
<li class="nav-downloads" role="menuitem"><a href="../where-to-download-my-models/">Downloads</a></li>
<li class="nav-yet-another-test-suite" role="menuitem"><a href="../yet-another-test-suite/">Yet Another Test Suite</a></li>
<li class="nav-tags" role="menuitem"><a href="../tags/">Tags</a></li>
<li class="nav-resume" role="menuitem"><a href="http://ansonbiggs.com">Resume</a></li>
<li class="nav-partners" role="menuitem"><a href="../partners/">Partners</a></li>
</ul>
</div>
<div class="site-nav-right">
<div class="social-links">
<a class="social-link social-link-fb" href="https://www.facebook.com/Anson3D" title="Facebook" target="_blank" rel="noopener"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 32 32"><path d="M19 6h5V0h-5c-3.86 0-7 3.14-7 7v3H8v6h4v16h6V16h5l1-6h-6V7c0-.542.458-1 1-1z"/></svg>
</a>
<a class="social-link social-link-tw" href="https://twitter.com/Anson_3D" title="Twitter" target="_blank" rel="noopener"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 32 32"><path d="M30.063 7.313c-.813 1.125-1.75 2.125-2.875 2.938v.75c0 1.563-.188 3.125-.688 4.625a15.088 15.088 0 0 1-2.063 4.438c-.875 1.438-2 2.688-3.25 3.813a15.015 15.015 0 0 1-4.625 2.563c-1.813.688-3.75 1-5.75 1-3.25 0-6.188-.875-8.875-2.625.438.063.875.125 1.375.125 2.688 0 5.063-.875 7.188-2.5-1.25 0-2.375-.375-3.375-1.125s-1.688-1.688-2.063-2.875c.438.063.813.125 1.125.125.5 0 1-.063 1.5-.25-1.313-.25-2.438-.938-3.313-1.938a5.673 5.673 0 0 1-1.313-3.688v-.063c.813.438 1.688.688 2.625.688a5.228 5.228 0 0 1-1.875-2c-.5-.875-.688-1.813-.688-2.75 0-1.063.25-2.063.75-2.938 1.438 1.75 3.188 3.188 5.25 4.25s4.313 1.688 6.688 1.813a5.579 5.579 0 0 1 1.5-5.438c1.125-1.125 2.5-1.688 4.125-1.688s3.063.625 4.188 1.813a11.48 11.48 0 0 0 3.688-1.375c-.438 1.375-1.313 2.438-2.563 3.188 1.125-.125 2.188-.438 3.313-.875z"/></svg>
</a>
</div>
<a class="subscribe-button" href="#subscribe">Subscribe</a>
</div>
</nav>
</div>
</header>
<main id="site-main" class="site-main outer">
<div class="inner">
<article class="post-full post tag-yet-another-test-suite tag-inventor tag-guide tag-3d-printing ">
<header class="post-full-header">
<section class="post-full-meta">
<time class="post-full-meta-date" datetime="2018-08-08">8 August 2018</time>
<span class="date-divider">/</span> <a href="../tag/yet-another-test-suite/">Yet Another Test Suite</a>
</section>
<h1 class="post-full-title">Yet Another Test Suite: Stringing Test</h1>
</header>
<figure class="post-full-image">
<img srcset="../content/images/size/w300/2018/08/_---Poor-Stringing.png 300w, ../content/images/size/w600/2018/08/_---Poor-Stringing.png 600w, ../content/images/size/w1000/2018/08/_---Poor-Stringing.png 1000w, ../content/images/size/w2000/2018/08/_---Poor-Stringing.png 2000w" sizes="(max-width: 800px) 400px,
(max-width: 1170px) 700px,
1400px" src="../content/images/size/w2000/2018/08/_---Poor-Stringing.png" alt="Yet Another Test Suite: Stringing Test">
</figure>
<section class="post-full-content">
<div class="post-content">
<h4 id="gotomyfulllistof3dprintingtroubleshootingguides"><a href="../yet-another-test-suite/">Go to My full list of 3D Printing Troubleshooting Guides</a></h4>
<p><em>This is the beginning of a larger suite of test prints I am developing that can be used to calibrate your 3D printer cheaply, and quickly.</em></p>
<h2 id="summary">Summary</h2>
<p>Stringing, also often referred to as Oozing, is when a print has small hairs or in extreme cases thick lines of the filament in between the outside perimeter of two print locations. Luckily cleanup for Stringing is generally pretty simple as long as the stringing isn't extreme. If you are unfortunate enough to have extreme stringing, then this guide and the included test print should get you up and running in no time.</p>
<p><em>This model is fully parameterized if you have Inventor.</em></p>
<p><img src="../content/images/2018/08/Inventor-Preview.png#full" alt="Inventor-Preview"></p>
<p style="text-align: center; font-style: italic;"> Preview of model in Inventor </p>
<h2 id="contents">Contents</h2>
<p>This project contains a .stl file that has 3 Cones in a line. They are set up so that they test every length from 0mm to 15mm by default. There is also a .ipt file if you have Inventor and would like to make modifications to this. This model only uses one parameter, the longest distance you want stringing to be tested at and it automagically does the rest for you.</p>
<h2 id="goalsofthisprint">Goals of This Print</h2>
<p>The two major factors affecting stringing are <strong>Retraction</strong> and <strong>Temperature</strong>. Too high of a Temperature would cause a host of other issues in your prints so if you are mainly just experiencing stringing then Retraction is probably your issue. The included .stl tests stringing from 0mm to 15mm by default. Small strings often referred to as hairs are very common at small distances and are very easy to clean up after the print has finished. If stringing is prominent on the longer distances then I would look into the troubleshooting steps.</p>
<p><img src="../content/images/2018/08/Minimal-Stringing.jpg#full" alt="Minimal-Stringing"></p>
<p style="text-align: center; font-style: italic;"> Example of Good Stringing </p>
<p><img src="../content/images/2018/08/Poor-Stringing.jpg#full" alt="Poor-Stringing"></p>
<p style="text-align: center; font-style: italic;"> Example of Poor Stringing </p>
<h3 id="retraction">Retraction</h3>
<p>Most every slicer has this ability, and thankfully this is more than likely your issue if stringing is an issue. Retraction causes your printer to pull some filament back when moving the print head in between parts of your print. The two parameters for this setting are <strong>Distance</strong> and <strong>Speed</strong>. Distance is how much filament gets pulled back, and speed is how fast it pulls it back. Mileage varies greatly by the printer so it's important to search online for some good baseline values to get started. The values I use for my Ender 3 are 6.20mm <em>Retraction Distance</em>, and 5100mm/min <em>Retraction Speed</em>. It is important that you do not set either of these values too crazy high because you can strip your filament causing it to not feed to your extruder.</p>
<h3 id="temperature">Temperature</h3>
<p><em>If stringing is your only print issue, then your temperature is probably fine.</em></p>
<p>Too high of a temperature can make your filament really thin meaning it can come out the extruder tip just from a little gravity. This is pretty easily fixed by dropping your extruder temperature by 5ish degrees C.</p>
<h3 id="cleanup">Clean-Up</h3>
<p>Small amounts of stringing are perfectly fine and extremely easy to clean up after a print has finished. If there are only a few hairs I've had good luck with just rubbing them off with my finger, or if you have a large amount then using a heat gun or hair dryer usually melts them away pretty quickly. Superfine sandpaper works great as well.</p>
<p>Larger strings should be easy to fix with the above steps, but if you do end up with one then clipping them off with a pair of small diagonal wire cutters or worst case some fingernail clippers. Anything that can cut close to the walls of the print will work great.</p>
<h2 id="printsettings">Print Settings</h2>
<p>This model shouldn't require rafts or infill, but it may be beneficial to print it at your normal printing settings to be 100% sure everything is operating as it should.</p>
<h2 id="download">Download</h2>
<p><a href="https://www.thingiverse.com/thing:3039763">Get this File on my Thingiverse</a></p>
<p><a href="https://bit.ly/stringingTest">Get this File on my GitLab</a></p>
</div>
</section>
<section class="subscribe-form">
<h3 class="subscribe-form-title">Subscribe to Anson 3D</h3>
<p>Get the latest posts delivered right to your inbox</p>
<form method="post" action="/subscribe/" id class>
<input class="confirm" type="hidden" name="confirm"><input class="location" type="hidden" name="location"><input class="referrer" type="hidden" name="referrer">
<div class="form-group">
<input class="subscribe-email" type="email" name="email" placeholder="youremail@example.com">
</div>
<button id class type="submit"><span>Subscribe</span></button>
<script type="2a9cc72ee1b4edbf74f347c7-text/javascript">
(function(g,h,o,s,t){
var buster = function(b,m) {
h[o]('input.'+b).forEach(function (i) {
i.value=i.value || m;
});
};
buster('location', g.location.href);
buster('referrer', h.referrer);
})(window,document,'querySelectorAll','value');
</script>
</form>
</section>
<footer class="post-full-footer">
<section class="author-card">
<img class="author-profile-image" src="../content/images/size/w100/2019/09/anson_suit_cropped.jpg" alt="Anson Biggs">
<section class="author-card-content">
<h4 class="author-card-name"><a href="../author/anson/">Anson Biggs</a></h4>
<p>I am an undergraduate Aerospace Engineering student with a focus on Astronautics and a minor in Electronic Engineering studying at Embry-Riddle Aeronautical University in Prescott, Arizona.
</p>
</section>
</section>
<div class="post-full-footer-right">
<a class="author-card-button" href="../author/anson/">Read More</a>
</div>
</footer>
</article>
</div>
</main>
<aside class="read-next outer">
<div class="inner">
<div class="read-next-feed">
<article class="read-next-card" style="background-image: url(../content/images/size/w600/2018/08/chris-liverani-552652-unsplash.jpg)">
<header class="read-next-card-header">
<small class="read-next-card-header-sitetitle">&mdash; Anson 3D &mdash;</small>
<h3 class="read-next-card-header-title"><a href="../tag/yet-another-test-suite/">Yet Another Test Suite</a></h3>
</header>
<div class="read-next-divider"><svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24"><path d="M13 14.5s2 3 5 3 5.5-2.463 5.5-5.5S21 6.5 18 6.5c-5 0-7 11-12 11C2.962 17.5.5 15.037.5 12S3 6.5 6 6.5s4.5 3.5 4.5 3.5"/></svg>
</div>
<div class="read-next-card-content">
<ul>
<li><a href="../yet-another-test-suite-overhang-test/">Yet Another Test Suite: Overhang Test</a></li>
<li><a href="../yet-another-test-suite/">Yet Another Test Suite</a></li>
<li><a href="../yet-another-test-suite-bridging-test/">Yet Another Test Suite: Bridging Test</a></li>
</ul>
</div>
<footer class="read-next-card-footer">
<a href="../tag/yet-another-test-suite/">See all 3 posts →</a>
</footer>
</article>
<article class="post-card post tag-yet-another-test-suite tag-3d-printing tag-guide tag-inventor tag-3d-modeling ">
<a class="post-card-image-link" href="../yet-another-test-suite-overhang-test/">
<img class="post-card-image" srcset="../content/images/size/w300/2018/08/coverPhoto.png 300w, ../content/images/size/w600/2018/08/coverPhoto.png 600w, ../content/images/size/w1000/2018/08/coverPhoto.png 1000w, ../content/images/size/w2000/2018/08/coverPhoto.png 2000w" sizes="(max-width: 1000px) 400px, 700px" src="../content/images/size/w600/2018/08/coverPhoto.png" alt="Yet Another Test Suite: Overhang Test">
</a>
<div class="post-card-content">
<a class="post-card-content-link" href="../yet-another-test-suite-overhang-test/">
<header class="post-card-header">
<span class="post-card-tags">Yet Another Test Suite</span>
<h2 class="post-card-title">Yet Another Test Suite: Overhang Test</h2>
</header>
<section class="post-card-excerpt">
<p>This is the beginning of a larger suite of test prints I am developing that can be used to calibrate your 3D printer cheaply, and quickly. Find a full write up and other</p>
</section>
</a>
<footer class="post-card-meta">
<ul class="author-list">
<li class="author-list-item">
<div class="author-name-tooltip">
Anson Biggs
</div>
<a href="../author/anson/" class="static-avatar">
<img class="author-profile-image" src="../content/images/size/w100/2019/09/anson_suit_cropped.jpg" alt="Anson Biggs">
</a>
</li>
</ul>
<span class="reading-time">3 min read</span>
</footer>
</div>
</article>
<article class="post-card post tag-yet-another-test-suite ">
<a class="post-card-image-link" href="../yet-another-test-suite/">
<img class="post-card-image" srcset="../content/images/size/w300/2018/08/Yet-Another-Test-Suite.png 300w, ../content/images/size/w600/2018/08/Yet-Another-Test-Suite.png 600w, ../content/images/size/w1000/2018/08/Yet-Another-Test-Suite.png 1000w, ../content/images/size/w2000/2018/08/Yet-Another-Test-Suite.png 2000w" sizes="(max-width: 1000px) 400px, 700px" src="../content/images/size/w600/2018/08/Yet-Another-Test-Suite.png" alt="Yet Another Test Suite">
</a>
<div class="post-card-content">
<a class="post-card-content-link" href="../yet-another-test-suite/">
<header class="post-card-header">
<span class="post-card-tags">Yet Another Test Suite</span>
<h2 class="post-card-title">Yet Another Test Suite</h2>
</header>
<section class="post-card-excerpt">
<p>Yet Another Test Suite is a suite of tests for calibrating your 3D Printer. The goal of this specific suite of tests is that they are easy to read, quick to print, and</p>
</section>
</a>
<footer class="post-card-meta">
<ul class="author-list">
<li class="author-list-item">
<div class="author-name-tooltip">
Anson Biggs
</div>
<a href="../author/anson/" class="static-avatar">
<img class="author-profile-image" src="../content/images/size/w100/2019/09/anson_suit_cropped.jpg" alt="Anson Biggs">
</a>
</li>
</ul>
<span class="reading-time">2 min read</span>
</footer>
</div>
</article>
</div>
</div>
</aside>
<div class="floating-header">
<div class="floating-header-logo">
<a href="../">
<img src="../content/images/size/w30/2018/08/Anson.png" alt="Anson 3D icon">
<span>Anson 3D</span>
</a>
</div>
<span class="floating-header-divider">&mdash;</span>
<div class="floating-header-title">Yet Another Test Suite: Stringing Test</div>
<div class="floating-header-share">
<div class="floating-header-share-label">Share this <svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 24 24">
<path d="M7.5 15.5V4a1.5 1.5 0 1 1 3 0v4.5h2a1 1 0 0 1 1 1h2a1 1 0 0 1 1 1H18a1.5 1.5 0 0 1 1.5 1.5v3.099c0 .929-.13 1.854-.385 2.748L17.5 23.5h-9c-1.5-2-5.417-8.673-5.417-8.673a1.2 1.2 0 0 1 1.76-1.605L7.5 15.5zm6-6v2m-3-3.5v3.5m6-1v2"/>
</svg>
</div>
<a class="floating-header-share-tw" href="https://twitter.com/share?text=Yet%20Another%20Test%20Suite%3A%20Stringing%20Test&url=http://localhost:8080/yet-another-test-suite-stringing-test/" onclick="if (!window.__cfRLUnblockHandlers) return false; window.open(this.href, 'share-twitter', 'width=550,height=235');return false;" data-cf-modified-2a9cc72ee1b4edbf74f347c7->
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 32 32"><path d="M30.063 7.313c-.813 1.125-1.75 2.125-2.875 2.938v.75c0 1.563-.188 3.125-.688 4.625a15.088 15.088 0 0 1-2.063 4.438c-.875 1.438-2 2.688-3.25 3.813a15.015 15.015 0 0 1-4.625 2.563c-1.813.688-3.75 1-5.75 1-3.25 0-6.188-.875-8.875-2.625.438.063.875.125 1.375.125 2.688 0 5.063-.875 7.188-2.5-1.25 0-2.375-.375-3.375-1.125s-1.688-1.688-2.063-2.875c.438.063.813.125 1.125.125.5 0 1-.063 1.5-.25-1.313-.25-2.438-.938-3.313-1.938a5.673 5.673 0 0 1-1.313-3.688v-.063c.813.438 1.688.688 2.625.688a5.228 5.228 0 0 1-1.875-2c-.5-.875-.688-1.813-.688-2.75 0-1.063.25-2.063.75-2.938 1.438 1.75 3.188 3.188 5.25 4.25s4.313 1.688 6.688 1.813a5.579 5.579 0 0 1 1.5-5.438c1.125-1.125 2.5-1.688 4.125-1.688s3.063.625 4.188 1.813a11.48 11.48 0 0 0 3.688-1.375c-.438 1.375-1.313 2.438-2.563 3.188 1.125-.125 2.188-.438 3.313-.875z"/></svg>
</a>
<a class="floating-header-share-fb" href="https://www.facebook.com/sharer/sharer.php?u=http://localhost:8080/yet-another-test-suite-stringing-test/" onclick="if (!window.__cfRLUnblockHandlers) return false; window.open(this.href, 'share-facebook','width=580,height=296');return false;" data-cf-modified-2a9cc72ee1b4edbf74f347c7->
<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 32 32"><path d="M19 6h5V0h-5c-3.86 0-7 3.14-7 7v3H8v6h4v16h6V16h5l1-6h-6V7c0-.542.458-1 1-1z"/></svg>
</a>
</div>
<progress id="reading-progress" class="progress" value="0">
<div class="progress-container">
<span class="progress-bar"></span>
</div>
</progress>
</div>
<footer class="site-footer outer">
<div class="site-footer-content inner">
<section class="copyright"><a href="../">Anson 3D</a> &copy; 2019</section>
<nav class="site-footer-nav">
<a href="../">Latest Posts</a>
<a href="https://www.facebook.com/Anson3D" target="_blank" rel="noopener">Facebook</a>
<a href="https://twitter.com/Anson_3D" target="_blank" rel="noopener">Twitter</a>
<a href="https://ghost.org" target="_blank" rel="noopener">Ghost</a>
</nav>
</div>
</footer>
</div>
<div id="subscribe" class="subscribe-overlay">
<a class="subscribe-overlay-close" href="#"></a>
<div class="subscribe-overlay-content">
<h1 class="subscribe-overlay-title">Subscribe to Anson 3D</h1>
<p class="subscribe-overlay-description">Stay up to date! Get all the latest &amp; greatest posts delivered straight to your inbox</p>
<form method="post" action="/subscribe/" id class>
<input class="confirm" type="hidden" name="confirm"><input class="location" type="hidden" name="location"><input class="referrer" type="hidden" name="referrer">
<div class="form-group">
<input class="subscribe-email" type="email" name="email" placeholder="youremail@example.com">
</div>
<button id class type="submit"><span>Subscribe</span></button>
<script type="2a9cc72ee1b4edbf74f347c7-text/javascript">
(function(g,h,o,s,t){
var buster = function(b,m) {
h[o]('input.'+b).forEach(function (i) {
i.value=i.value || m;
});
};
buster('location', g.location.href);
buster('referrer', h.referrer);
})(window,document,'querySelectorAll','value');
</script>
</form>
</div>
</div>
<script type="2a9cc72ee1b4edbf74f347c7-text/javascript">
var images = document.querySelectorAll('.kg-gallery-image img');
images.forEach(function (image) {
var container = image.closest('.kg-gallery-image');
var width = image.attributes.width.value;
var height = image.attributes.height.value;
var ratio = width / height;
container.style.flex = ratio + ' 1 0%';
})
</script>
<script src="https://code.jquery.com/jquery-3.2.1.min.js" crossorigin="anonymous" type="2a9cc72ee1b4edbf74f347c7-text/javascript">
</script>
<script type="2a9cc72ee1b4edbf74f347c7-text/javascript" src="../assets/built/jquery.fitvids.js"></script>
<script src="../assets/built/infinitescroll.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<script type="2a9cc72ee1b4edbf74f347c7-text/javascript">
// NOTE: Scroll performance is poor in Safari
// - this appears to be due to the events firing much more slowly in Safari.
// Dropping the scroll event and using only a raf loop results in smoother
// scrolling but continuous processing even when not scrolling
$(document).ready(function () {
// Start fitVids
var $postContent = $(".post-full-content");
$postContent.fitVids();
// End fitVids
var progressBar = document.querySelector('#reading-progress');
var header = document.querySelector('.floating-header');
var title = document.querySelector('.post-full-title');
var lastScrollY = window.scrollY;
var lastWindowHeight = window.innerHeight;
var lastDocumentHeight = $(document).height();
var ticking = false;
function onScroll() {
lastScrollY = window.scrollY;
requestTick();
}
function onResize() {
lastWindowHeight = window.innerHeight;
lastDocumentHeight = $(document).height();
requestTick();
}
function requestTick() {
if (!ticking) {
requestAnimationFrame(update);
}
ticking = true;
}
function update() {
var trigger = title.getBoundingClientRect().top + window.scrollY;
var triggerOffset = title.offsetHeight + 35;
var progressMax = lastDocumentHeight - lastWindowHeight;
// show/hide floating header
if (lastScrollY >= trigger + triggerOffset) {
header.classList.add('floating-active');
} else {
header.classList.remove('floating-active');
}
progressBar.setAttribute('max', progressMax);
progressBar.setAttribute('value', lastScrollY);
ticking = false;
}
window.addEventListener('scroll', onScroll, {passive: true});
window.addEventListener('resize', onResize, false);
update();
});
</script>
<script src="https://embedd.io/embedd.min.js" type="2a9cc72ee1b4edbf74f347c7-text/javascript"></script>
<a rel="license" href="https://creativecommons.org/licenses/by-sa/4.0/"><img alt="Creative Commons License" style="border-width:0" src="https://i.creativecommons.org/l/by-sa/4.0/88x31.png"></a><br>This work is licensed under a <a rel="license" href="https://creativecommons.org/licenses/by-sa/4.0/">Creative Commons Attribution-ShareAlike 4.0 International License</a>.
<script src="https://ajax.cloudflare.com/cdn-cgi/scripts/95c75768/cloudflare-static/rocket-loader.min.js" data-cf-settings="2a9cc72ee1b4edbf74f347c7-|49" defer></script></body>
</html>
View Git Blame Copy Permalink