Updated to include tags

HDD Pi Case V1/README.md

@@ -1,11 +1,17 @@
-Summary
-=======
+# HDD Pi Case V1
+
+## Tags
+
+`
+computer, hard_drive, McMaster-Carr, Raspberry_Pi, Raspberry_pi_3, raspberry_pi_case,
+`
+
+## Summary
 
 This Raspberry Pi case is designed to fit into a standard 3.5in hard drive slot. It works well with tool less mounting systems, but I also added the ability for threaded nuts to be dropped in which work great as well and make this compatible with anything that a standard hard drive fit into.  
 The nuts that I built around are the [McMaster-Carr 90480a007](https://www.mcmaster.com/#90480a007/) This cost me $8.32 for 100 nuts delivered to my door but I am sure a local hardware store would have the same thing far cheaper.
 
-Print Settings
-==============
+## Print Settings
 
 **Printer Brand:**
 
@@ -31,14 +37,11 @@ Yes
 
 15%
 
-  
-
 **Notes:**
 
 I have printed this part a few times and you can get away with doing no supports you just end up with some long bridges. I would advise against supports inside where the nuts go because it is nearly impossible to get those supports out correctly.
 
-How I Designed This
-===================
+## How I Designed This
 
 This was my first project using Fusion 360, and my first project built from the ground up for 3D printing. I started by building a profile sketch or “master sketch” of an HDD with the placement of the screw holes. Then I decided to make a rough Raspberry Pi model since I plan on many 3D printed projects for the Pi it would be easier to have a digital copy.