mirror of
https://gitlab.com/MisterBiggs/MyModels.git
synced 2025-06-18 16:16:43 +00:00
38 lines
1.3 KiB
Markdown
38 lines
1.3 KiB
Markdown
Yet Another Test Suite is a suite of tests for calibrating your 3D Printer. The goal of this specific suite of tests is that they are easy to read, quick to print, and cheap. This page is made to act as a directory for finding all of my tests in one place.
|
|
|
|
---
|
|
|
|
## Table Of Contents
|
|
|
|
#### [Bridge Test](##Bridge-Test)
|
|
|
|
#### [Overhang Test]() [- In Progress -]
|
|
|
|
#### [Stringing Test]() [- In Progress -]
|
|
|
|
#### [Sharp Corner Test]() [- In Progress -]
|
|
|
|
#### [Tolerance Test]() [- In Progress -]
|
|
|
|
#### [Screw Test]() [- In Progress -]
|
|
|
|
---
|
|
|
|
## Bridge Test
|
|
|
|
|
|
|
|
The two major factors that come into play when printing a good bridge are **Temperature** and **Print Speed**. The lower both of these respective values are the better your bridges are likely to succeed. The goal of this project is that its a test that prints very fast, the full test should print in under 45 minutes.
|
|
|
|
This model is fully parameterized if you have Inventor.
|
|
|
|
#### Continued
|
|
|
|
[View the full writeup On my Blog](http://blog.ansonbiggs.com/yet-another-test-suite-bridging-test/)
|
|
|
|
[View this Project on my Thingiverse](https://www.thingiverse.com/thing:3036666)
|
|
|
|
[View this Project on my GitLab](http://bit.ly/AnsonBridgeTest)
|
|
|
|
---
|